Out of stock
Zoom the image with mouse

Walthers Mainline HO 39' Trinity 3281 2-Bay Covered Hopper VTG North America VTGX #350198

Write a review
| Ask a question
Walthers
910-7563
Out of stock
HO
$24.99
WalthersMainline makes it easy to add more business to your HO Scale railroad with the 39' Trinity 3281 2-Bay Covered Hoppers! Built especially to handle heavier materials, they're often seen in unit trains moving loads of fracturing sand to new oil fields. Based on the later production prototypes introduced in...
Scale Chart
WalthersMainline makes it easy to add more business to your HO Scale railroad with the 39' Trinity 3281 2-Bay Covered Hoppers! Built especially to handle heavier materials, they're often seen in unit trains moving loads of fracturing sand to new oil fields. Based on the later production prototypes introduced in the 1990s with seven side panels (two narrow and five large), they can also be found moving cement, bentonite and other heavier cargoes. Ready for service in a variety of modern schemes, each with four numbers, they're perfect for serving the Cornerstone(R) Glacier Industrial Sands (933-4035), or the Road-to-Rail Aggregate Transfer (933-4036) structure kits, both sold separately. Features of these models include:
  • One time run of these roadnumbers, order now - limited quantity available
  • In service from late 1990s to the present
  • Built especially for heavier materials including fracking sand, cement, bentonite and more
  • Separately applied brake gear, running board, discharge gates, inlet hatches and end ladder cages
  • Correct 36" RP-25 metal wheelsets
  • Proto MAX(TM) metal knuckle couplers

DC ANALOG SYSTEMS
DC Analog is a control system standard to most starter sets which allows the user to control the track (and not the locomotive). This means that two or more trains on the same track will move, speed up, slow down and stop at the same time.
DCC DIGTIAL SYSTEMS
DCC Digital stands for ‘Digital Command Control’. DCC Digital systems allow individual locomotives and accessories to be independently controlled from the controller. Other functions, such as lighting and sound (if equipped), can also be independently controlled.

DCC READY (Standard DC)

This means the locomotive, train set or equipment is fitted with a socket that is ready to accept a DCC decoder.  The most common and readily available types of decoders here in the US are: 6 pin, 8 pin, next 18, and 21 pin.  Prior to buying a  decoder for your locomotive, verify which of the previous you will need.  This information is usually found on the manufacturers site or instruction booklet.

The locomotive requires a DCC decoder to be fitted to the socket in order for it to work on a DCC controlled layout. It can however still be used on the conventional DC (analog) layout. 

 

DCC EQUIPPED

This indicates that the locomotive, train set or equipment is fitted with a decoder that has been pre-installed at the factory. 

This means that the locomotive is ready to run and operate on a DCC controlled layout and can now be called up by request from a Digital Controller. Additional features, such as lighting and sound (if equipped), can also be independently controlled (only if the locomotive is fitted with these accessories).

Some DCC equipped locomotives can also be run on DC layouts (see note below). Some accessories may continue to work automatically, such as lighting and sound (if equipped), however, the user will not have independent control of these under DC operation. It is important to note that manufacturer's decoders who support sound playback on DC operation will only provide a selection of sounds when the locomotive is detected to be moving or stopping (such as chuffing, coasting and braking sounds).  

*Some manufacturers may issue a warning that they do not recommend a DCC fitted locomotive to be operated on a DC (analog) layout, and may void any warranties. Check your locomotive's manual for more information. Not all sound decoders enable sound playback on DC operation, and this information is provided with your decoder manual.

 SHIPPING

All orders are processed within 1-4 business days. Orders are not shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, you will be notified.

Shipping costs for your order are calculated by the carrier and displayed at checkout.

We currently ship throughout the US & Canada only.
When your order ships, you will receive a shipment confirmation email containing your tracking number(s).

(*When applicable) HustleDude.com offers free shipping on select orders in contiguous United States and reduced shipping to other locations. Because we absorb the shipping costs when you select "free shipping", we cannot guarantee a certain carrier. The carrier will be selected at our discretion.

 

PAYMENTS

Payment methods:
Trulli

 

 

You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top