Out of stock
Zoom the image with mouse

Rapido Trains GMD F59PH Metra #97 (2017, blue, black, orange, red) - LokSound and DCC

Write a review
| Ask a question
Rapido
19510
HO
Price:  $299.99

The Rapido Trains HO Scale GMD F59PH diesels are based on popular passenger locomotives constructed in Canada for use on commuter railroads across the continent. In the mid-1980s, GO Transit was looking to replace its aging loco fleet with power designed to meet growing demand for Toronto area commuter service. The new diesels needed quick acceleration, while pulling up to 10 Hawker-Siddeley-UTDC bi-level coaches, and to save on fuel, a separate HEP generator. GMD developed the F59PH. It was equipped with a turbocharged 12-cylinder two-stroke diesel prime mover (12-710G3A), a full-width North American comfort cab and HEP provided by a smaller 600hp GM 8-cylinder diesel.

The first F59PHs were delivered in 1988, and over the next six years 33 more of the successful locomotives were delivered. The later units had a few design upgrades including larger fuel tanks and altered rear grilles. The final four units were delivered in 1994, but the Government of Ontario was in a financial crunch and quickly sold them to Trinity Rail Express in Dallas, Texas. Several surplus units were leased to West Coast Express in Vancouver, British Columbia, and Metrolink in Los Angeles. Metrolink was also a large purchaser of the F59PH units with 22 units delivered in 1992 and 1993, and the agency also leased three ex-GO units in 2018. Former GO units, available after GO began replacing them with new power in 2007, have been sold or leased to AMT Montreal, Metra, North Carolina DOT and RB Railway Group. A few are still in service on GO.

Features of the GMD F59PH include phase-specific details, directional headlights, metal grilles, lighted control stands, cab interior details and lighted numberboards and class lights. The smooth-running drive features a coreless motor, dual flywheels and the model comes equipped with Macdonald-Cartier knuckle couplers compatible with all magnetic knuckle couplers.

This sound-equipped GMD F59PH is equipped with a full-featured ESU LokSound and DCC decoder with accurate sounds recorded from the prototype.

DC ANALOG SYSTEMS
DC Analog is a control system standard to most starter sets which allows the user to control the track (and not the locomotive). This means that two or more trains on the same track will move, speed up, slow down and stop at the same time.
DCC DIGTIAL SYSTEMS
DCC Digital stands for ‘Digital Command Control’. DCC Digital systems allow individual locomotives and accessories to be independently controlled from the controller. Other functions, such as lighting and sound (if equipped), can also be independently controlled.

DCC READY (Standard DC)

This means the locomotive, train set or equipment is fitted with a socket that is ready to accept a DCC decoder.  The most common and readily available types of decoders here in the US are: 6 pin, 8 pin, next 18, and 21 pin.  Prior to buying a  decoder for your locomotive, verify which of the previous you will need.  This information is usually found on the manufacturers site or instruction booklet.

The locomotive requires a DCC decoder to be fitted to the socket in order for it to work on a DCC controlled layout. It can however still be used on the conventional DC (analog) layout. 

 

DCC EQUIPPED

This indicates that the locomotive, train set or equipment is fitted with a decoder that has been pre-installed at the factory. 

This means that the locomotive is ready to run and operate on a DCC controlled layout and can now be called up by request from a Digital Controller. Additional features, such as lighting and sound (if equipped), can also be independently controlled (only if the locomotive is fitted with these accessories).

Some DCC equipped locomotives can also be run on DC layouts (see note below). Some accessories may continue to work automatically, such as lighting and sound (if equipped), however, the user will not have independent control of these under DC operation. It is important to note that manufacturer's decoders who support sound playback on DC operation will only provide a selection of sounds when the locomotive is detected to be moving or stopping (such as chuffing, coasting and braking sounds).  

*Some manufacturers may issue a warning that they do not recommend a DCC fitted locomotive to be operated on a DC (analog) layout, and may void any warranties. Check your locomotive's manual for more information. Not all sound decoders enable sound playback on DC operation, and this information is provided with your decoder manual.

 STORE PICK UP

Pickup times are by appointment only, generally Monday thru Friday between 10am and 1pm. Your scheduled pickup window will be notated on your pickup confirmation email. If the scheduled pickup time will not work for you, simply reply to the email and we will work with you to provide a time that best fits your schedule.

 SHIPPING

All orders are processed within 1-4 business days. Orders are not shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, you will be notified.

Shipping costs for your order are calculated by the carrier and displayed at checkout.

*High value items/orders will require a signature upon delivery. (Generally, but not limited to orders in excess of $450)

We currently ship throughout the US & Canada only.
When your order ships, you will receive a shipment confirmation email containing your tracking number(s).

(*When applicable) HustleDude.com offers free shipping on select orders in contiguous United States and reduced shipping to other locations. Because we absorb the shipping costs when you select "free shipping", we cannot guarantee a certain carrier. The carrier will be selected at our discretion.

Learn more

 

PAYMENTS

Payment methods:
Trulli

 

 

You have successfully subscribed!
This email has been registered