Out of stock
Zoom the image with mouse

Lionel #990 LEGACY COMMAND SET

Write a review
| Ask a question
Lionel
LNL14295
Out of stock
O
$379.99
The #990 LEGACY Command Set features a #991 LEGACY CAB-2 Remote Controller and a #992 LEGACY Command Base/Charger, the two components you need to get started. Only one LEGACY Command Base/Charger is required per layout. Like traditional TMCC, the LEGACY Command Base/Charger receives information from the Remote Controller and sends...

The #990 LEGACY Command Set features a #991 LEGACY CAB-2 Remote Controller and a #992 LEGACY Command Base/Charger, the two components you need to get started. Only one LEGACY Command Base/Charger is required per layout.

Like traditional TMCC, the LEGACY Command Base/Charger receives information from the Remote Controller and sends it out to the track via a simple one-wire connection. But that's not all. The LEGACY Command Base/Charger remembers information about your layout, enabling the CAB-2 Remote Controller to display road names and numbers on the LCD screen.


  • SET INCLUDES:
  • #991 LEGACY CAB-2 Remote Controller
  • #992 LEGACY Command Base/Charger
  • CAB-2 Remote Controller Features:
  • Back-lit LCD screen - the largest on the market
  • Back-lit LCD keypad displays numbers or icons for ease of use
  • Built-in rechargeable batteries
  • Feedback mode - the remote vibrates to reinforce the effort and momentum of your locomotive
  • Accepts memory modules from each LEGACY Control System locomotive
  • COMMAND BASE/CHARGER FEATURES:
  • Only one LEGACY Command Base/Charger required per layout
  • Simple one-wire connection to your layout
  • Built-in dock for recharging CAB-2 Remote Controller
  • Stores operating information and settings for your layout

 

      DC ANALOG SYSTEMS
      DC Analog is a control system standard to most starter sets which allows the user to control the track (and not the locomotive). This means that two or more trains on the same track will move, speed up, slow down and stop at the same time.
      DCC DIGTIAL SYSTEMS
      DCC Digital stands for ‘Digital Command Control’. DCC Digital systems allow individual locomotives and accessories to be independently controlled from the controller. Other functions, such as lighting and sound (if equipped), can also be independently controlled.

      DCC READY (Standard DC)

      This means the locomotive, train set or equipment is fitted with a socket that is ready to accept a DCC decoder.  The most common and readily available types of decoders here in the US are: 6 pin, 8 pin, next 18, and 21 pin.  Prior to buying a  decoder for your locomotive, verify which of the previous you will need.  This information is usually found on the manufacturers site or instruction booklet.

      The locomotive requires a DCC decoder to be fitted to the socket in order for it to work on a DCC controlled layout. It can however still be used on the conventional DC (analog) layout. 

       

      DCC EQUIPPED

      This indicates that the locomotive, train set or equipment is fitted with a decoder that has been pre-installed at the factory. 

      This means that the locomotive is ready to run and operate on a DCC controlled layout and can now be called up by request from a Digital Controller. Additional features, such as lighting and sound (if equipped), can also be independently controlled (only if the locomotive is fitted with these accessories).

      Some DCC equipped locomotives can also be run on DC layouts (see note below). Some accessories may continue to work automatically, such as lighting and sound (if equipped), however, the user will not have independent control of these under DC operation. It is important to note that manufacturer's decoders who support sound playback on DC operation will only provide a selection of sounds when the locomotive is detected to be moving or stopping (such as chuffing, coasting and braking sounds).  

      *Some manufacturers may issue a warning that they do not recommend a DCC fitted locomotive to be operated on a DC (analog) layout, and may void any warranties. Check your locomotive's manual for more information. Not all sound decoders enable sound playback on DC operation, and this information is provided with your decoder manual.

       SHIPPING

      All orders are processed within 1-4 business days. Orders are not shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, you will be notified.

      Shipping costs for your order are calculated by the carrier and displayed at checkout.

      We currently ship throughout the US & Canada only.
      When your order ships, you will receive a shipment confirmation email containing your tracking number(s).

      (*When applicable) HustleDude.com offers free shipping on select orders in contiguous United States and reduced shipping to other locations. Because we absorb the shipping costs when you select "free shipping", we cannot guarantee a certain carrier. The carrier will be selected at our discretion.

       

      PAYMENTS

      Payment methods:
      Trulli

       

       

      You have successfully subscribed!
      This email has been registered
      ico-collapse
      0
      Recently Viewed
      ic-cross-line-top
      Top
      ic-expand
      ic-cross-line-top