Out of stock
Zoom the image with mouse

Athearn Genesis HO SDP40F BNSF/MAERSK #6976 DCC Ready

Write a review
| Ask a question
Price:  $199.99

DCC Ready


  • All lighting feature LEDs
  • Rubber MU hoses for durability
  • Better than brass detail™
  • DCC+Sound models contain full-feature Tsunami2 sound decoder with EMD 645E3 prime mover sounds by SoundTraxx
  • Genesis 2.0 model features
    • Illuminated ground lights
    • Illuminated Numberboards


  • Former ATSF rebuilt SDF40-2 body
  • #6962 Roof mounted prime air conditioner removed
  • Other details same as ATSF units


  • ATSF rebuilt steam line access door snow plow pilot
  • ATSF rebuilt “Notch Nose” front step wells/handrails
  • Standard profile fan housings
  • Steam generator removed rear hood
  • ATSF rebuilt fuel tank
  • Flat nose variant
  • Cab mounted headlight
  • Nathan K3 horn on angled bracket
  • Antenna plane mounted sinclair antenna
  • Roof mounted prime air conditioner removed
  • On August 15, 2002, to commemorate the opening of the world’s largest container terminal (Pier 400 in Los Angeles), Maersk Sealand had one BNSF and one NS locomotive painted in their blue and silver scheme. The locomotives were loaned to Maersk for promotional events but retained their respective owner’s reporting marks. SDF40-2 6976 was the locomotive selected as the BNSF representative.

    DC Analog is a control system standard to most starter sets which allows the user to control the track (and not the locomotive). This means that two or more trains on the same track will move, speed up, slow down and stop at the same time.
    DCC Digital stands for ‘Digital Command Control’. DCC Digital systems allow individual locomotives and accessories to be independently controlled from the controller. Other functions, such as lighting and sound (if equipped), can also be independently controlled.

    DCC READY (Standard DC)

    This means the locomotive, train set or equipment is fitted with a socket that is ready to accept a DCC decoder.  The most common and readily available types of decoders here in the US are: 6 pin, 8 pin, next 18, and 21 pin.  Prior to buying a  decoder for your locomotive, verify which of the previous you will need.  This information is usually found on the manufacturers site or instruction booklet.

    The locomotive requires a DCC decoder to be fitted to the socket in order for it to work on a DCC controlled layout. It can however still be used on the conventional DC (analog) layout. 



    This indicates that the locomotive, train set or equipment is fitted with a decoder that has been pre-installed at the factory. 

    This means that the locomotive is ready to run and operate on a DCC controlled layout and can now be called up by request from a Digital Controller. Additional features, such as lighting and sound (if equipped), can also be independently controlled (only if the locomotive is fitted with these accessories).

    Some DCC equipped locomotives can also be run on DC layouts (see note below). Some accessories may continue to work automatically, such as lighting and sound (if equipped), however, the user will not have independent control of these under DC operation. It is important to note that manufacturer's decoders who support sound playback on DC operation will only provide a selection of sounds when the locomotive is detected to be moving or stopping (such as chuffing, coasting and braking sounds).  

    *Some manufacturers may issue a warning that they do not recommend a DCC fitted locomotive to be operated on a DC (analog) layout, and may void any warranties. Check your locomotive's manual for more information. Not all sound decoders enable sound playback on DC operation, and this information is provided with your decoder manual.


    Pickup times are by appointment only, generally Monday thru Friday between 10am and 1pm. Your scheduled pickup window will be notated on your pickup confirmation email. If the scheduled pickup time will not work for you, simply reply to the email and we will work with you to provide a time that best fits your schedule.


    All orders are processed within 1-4 business days. Orders are not shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, you will be notified.

    Shipping costs for your order are calculated by the carrier and displayed at checkout.

    *High value items/orders will require a signature upon delivery. (Generally, but not limited to orders in excess of $450)

    We currently ship throughout the US & Canada only.
    When your order ships, you will receive a shipment confirmation email containing your tracking number(s).

    (*When applicable) HustleDude.com offers free shipping on select orders in contiguous United States and reduced shipping to other locations. Because we absorb the shipping costs when you select "free shipping", we cannot guarantee a certain carrier. The carrier will be selected at our discretion.

    Learn more



    Payment methods:



    You have successfully subscribed!
    This email has been registered