Out of stock
Zoom the image with mouse

Athearn Genesis HO SD70ACe - DCC Ready UP #1111

Write a review
| Ask a question
Athearn
ATHG11110
Out of stock
HO
$149.99
Detailed Information Standard DC UP #1111 POWERED BY OUR PEOPLE FEATURES: All-new LED lighting Rubber MU hoses for durability Commemorative box Removable cab roof secured with magnets High-mount headlight now LED SD70ACE New for the SD70ACe, LED lighting Correctly-sized illuminated ditch lights Snowplow Front and rear trainline air hose with...
Scale Chart

Detailed Information

Standard DC

UP #1111 POWERED BY OUR PEOPLE FEATURES:

  • All-new LED lighting
  • Rubber MU hoses for durability
  • Commemorative box
  • Removable cab roof secured with magnets
  • High-mount headlight now LED

SD70ACE

  • New for the SD70ACe, LED lighting
  • Correctly-sized illuminated ditch lights
  • Snowplow
  • Front and rear trainline air hose with silver tips
  • Rubber multiple unit (MU) hoses with silver tips
  • Coupler cut bars
  • Train line air hoses
  • Flat or tapered front and rear anticlimbers
  • Safety tread on the walkways
  • Cab mounted headlight
  • Standard or isolated cab
  • Windshield wipers
  • Mirrors
  • Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
  • Airchime K5LLA horn with square or “tube” style mounting bracket
  • Large antenna dome
  • Small GPS antenna dome
  • Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
  • See-through radiator fans
  • Etched dynamic brake grille and screen with appropriate grid detail underneath
  • Dynamic brake louver variations per prototype
  • Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
  • Early or late hand brake housing and wheel
  • Early or Late Sander Brackets
  • Factory installed wire grab irons
  • Jacking pads per prototype
  • Plumbing alongside the frame appropriate to the specific railroad and purchase order
  • Fuel tanks with single or dual fuel fillers
  • HTCR trucks per prototype
  • Non-sound QuickPlug™ equipped with 21-pin NEM DCC plug
  • McHenry scale knuckle spring couplers
  • Minimum radius: 18”
  • Recommended radius: 22”

    DC ANALOG SYSTEMS
    DC Analog is a control system standard to most starter sets which allows the user to control the track (and not the locomotive). This means that two or more trains on the same track will move, speed up, slow down and stop at the same time.
    DCC DIGTIAL SYSTEMS
    DCC Digital stands for ‘Digital Command Control’. DCC Digital systems allow individual locomotives and accessories to be independently controlled from the controller. Other functions, such as lighting and sound (if equipped), can also be independently controlled.

    DCC READY (Standard DC)

    This means the locomotive, train set or equipment is fitted with a socket that is ready to accept a DCC decoder.  The most common and readily available types of decoders here in the US are: 6 pin, 8 pin, next 18, and 21 pin.  Prior to buying a  decoder for your locomotive, verify which of the previous you will need.  This information is usually found on the manufacturers site or instruction booklet.

    The locomotive requires a DCC decoder to be fitted to the socket in order for it to work on a DCC controlled layout. It can however still be used on the conventional DC (analog) layout. 

     

    DCC EQUIPPED

    This indicates that the locomotive, train set or equipment is fitted with a decoder that has been pre-installed at the factory. 

    This means that the locomotive is ready to run and operate on a DCC controlled layout and can now be called up by request from a Digital Controller. Additional features, such as lighting and sound (if equipped), can also be independently controlled (only if the locomotive is fitted with these accessories).

    Some DCC equipped locomotives can also be run on DC layouts (see note below). Some accessories may continue to work automatically, such as lighting and sound (if equipped), however, the user will not have independent control of these under DC operation. It is important to note that manufacturer's decoders who support sound playback on DC operation will only provide a selection of sounds when the locomotive is detected to be moving or stopping (such as chuffing, coasting and braking sounds).  

    *Some manufacturers may issue a warning that they do not recommend a DCC fitted locomotive to be operated on a DC (analog) layout, and may void any warranties. Check your locomotive's manual for more information. Not all sound decoders enable sound playback on DC operation, and this information is provided with your decoder manual.

     SHIPPING

    All orders are processed within 1-4 business days. Orders are not shipped on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, you will be notified.

    Shipping costs for your order are calculated by the carrier and displayed at checkout.

    We currently ship throughout the US & Canada only.
    When your order ships, you will receive a shipment confirmation email containing your tracking number(s).

    (*When applicable) HustleDude.com offers free shipping on select orders in contiguous United States and reduced shipping to other locations. Because we absorb the shipping costs when you select "free shipping", we cannot guarantee a certain carrier. The carrier will be selected at our discretion.

     

    PAYMENTS

    Payment methods:
    Trulli

     

     

    You have successfully subscribed!
    This email has been registered
    ico-collapse
    0
    Recently Viewed
    ic-cross-line-top
    Top
    ic-expand
    ic-cross-line-top